Trizeps VIII Plus

The new Trizeps VIII Plus CPU module uses the new i.MX 8M Plus processor from the NXP i.MX8 series. The i.MX 8M Plus SoC (System on Chip) has various processor units that can handle a wide range of computing operations. Of particular note is the NPU (Neural Processing Unit), which can handle computational processes in the field of AI (Artificial Intelligence) typically with learned neural networks. These can be used for pattern, speech and object recognition. and object recognition. This opens up new areas of application for the Trizeps VIII Plus SOM (System On Module). Equally important is the wide range of applications for the classic embedded functions. This is where the Dual Gigabit Ethernet and Dual CAN FD interfaces, which are used e.g. in industrial automation, are convincing. ""Low power"" applications or real-time applications can be provided by the integrated 800 MHz clocked Arm Cortex-M7 co-processor. USB 3.0 and PCIe are available as high-speed interfaces. The Trizeps VIII Plus can also be used for a wide range of multimedia applications. Fast image processing is enabled by high-performance video decoders and encoders as well as two image signal processors (Dual-ISP - Dual Image Signal Processor). Also, powerful audio and voice functions are available. Displays can be connected via HDMI, (dual-)LVDS or MIPI-DISI interfaces. Besides, the Trizeps VIII Plus extends the functionality of the i.MX 8M Plus SoC with the configurable FPGA, the programmable Kinetis Cortex M0+ MCU, the HiFi Audio Codec and the WLAN/Bluetooth module.

NXP i.MX 8M Plus family SoCs: Dual or Quad ARM Cortex®-A53 Cores + general purpose Cortex® M7 800MHz processor
• NXP i.MX 8M Plus Quad, 4x ARM Cortex®-A53 Cores up to 1.8GHz
• NXP i.MX 8M Plus Dual, 2x ARM Cortex®-A53 Cores up to 1.8GH
NPU: 2.3 TOPS Neural Network performance (not for Quad Lite)

Optional: NXP™ Kinetis V Arm® Cortex-M0+ up to 75 MHz / 8x 16 Bit ADC, UART, SPI, GPIO, I2C
Optional: Programmable FPGA, up to 4300 LUTs

Soldered down LPDDR4-4000 memory, 32-bit interface, up to 8GB

Integrated Graphics Processing Unit GC7000UL, supports 3 independent displays.

Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-4, MPEG-2, MVC, VC-1, RV, VP6, VP7, VP8, VP9, JPEG, HW encoding of HEVC/H.265, AVC/H.264

Supports OpenVG 1.1, OpenGL ES 3.1, OpenCL 1.2 Full Profile and Vulkan

HDMI, MIPI display (4 channel) / Single- or Dual-LVDS, LCD 24 Bit RGB

HDMI, LVDS, eDP: Up to 1920 x 1080p @60
Video-Decoder: 1080p60, h.265/4, VP9, VP8 / Video Encoder: 1080p60, h.265/4

Onboard 4 Bit wide μSD Card Socket or onboard 8 Bit wide eMMC

2x Gigabit Ethernet (1x RGMII PHY and 1x RGMII interface)
Optional: WiFi 802.11 a/b/g/n/ac 2x2 MU-MIMO / Bluetooth 4.2/5.0

2x USB 3.0 OTG

Up to 1x PCI-e x1 Gen3 port

Digital: 18x I2S TDM, DSD512, S/PDIF Tx + Rx, 8 channel PDM Microphone input
Analog: Stereo Headphone output, Mono Speaker output, Stereo Line-In, Microphone input

4x UART

3x 4 Bit wide SDIO 3.0
SPDIF In/Out
I2S
Multichannel Serial-Audio-Interface
2x I2C
SPI
QSPI
GPIOs
PWMs
2x CAN

3.3 VDC

Linux Yocto, Debian / Android / Windows 10 IoT

-40 ÷  85°C (industrial) / -25  ÷ 85°C (Extended Consumer) / 0 ÷ 70°C (Consumer)

67.6 x 36.7 x 6.4 mm