UDOO VISION

Intel® Atom® x7-E3950 Quad Core @1.6 GHz (Burst 2.0GHz), 2MB L2 cache, 12W TDP
Intel® Atom® x5-E3940 Quad Core @1.6 GHz (Burst 1.8GHz), 2MB L2 cache, 9W TDP
Intel® Pentium® N4200 Quad Core @1.1GHz (burst 2.5GHz), 2MB L2 cache, 6W TDP
Intel® Celeron® N3350 Dual Core @1.1GHz (burst 2.4GHz), 2MB L2 cache, 6W TDP

32-bit single-/dual-/quad-channel LPDDR4 soldered on-board, up to 2400 MT/s
Max memory size 8GB

Integrated Intel® HD Graphics 500 series controller with up to 18 Execution Units
HW decoding of HEVC(H.265), H.264, VP8, VP9, MPEG2, VC-1, WMV9, JPEG/MJPEG formats
HW encoding of HEVC(H.265), H.264, MVC, VP8, VP9 and JPEG/MPEG formats
Three independent display supported

Multimode DP++ on MiniDP connector
eDP on socket header connector

DP: up to 4096x2160 @ 60Hz
HDMI: up to 3840x2160 @ 30Hz
eDP: up to 3840x2160 @ 60Hz

eMMC 5.1 drive on-board, up to 64GB
SATA Gen3 7p M connector
SSD M.2 Socket 2 Key B lot, size 2260 / 3042 (excludes WWAN modules)
microSD Card slot (combo with miniSIM slot)

Dual Gigabit Ethernet connector
WWAN (modem) M.2 Socket 2 Key B 2260 / 3042 slot (excludes SSD interface)
Connectivity M.2 Socket 1 Key E 2230 slot for Wi-Fi+BTLE modules

USB 3.0 Dual Type-A connector
Internal USB 2.0 Dual pin header

HD audio codec
Line out + microphone on TRSS connector

2x RS-232/RS-422/RS-485 Serial ports on internal pin header

miniSIM slot for M.2 modems (combo with microSD slot)
8x GPI/Os connector
FAN connector
Buttons / activity LED front panel header connector
Optional TPM 2.0 on-board
ATMEL ATmega32u4 microcontroller with Arduino Leonardo compatible header

+12VDC
Cabled coin cell battery for RTC

Windows 10 Enterprise (64-bit)
Windows 10 IoT Core
Linux LTS (64-bit)
Yocto (64-bit)

0°C to +60°C (Commercial temperature range)*

*Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider applicationspecific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.