SOM-SMARC-MX95

NXP i.MX95 Applications Processors

• 6x Arm® Cortex™-A55 @2GHz
• Arm® Cortex™-M33 @333Mhz
• Arm® Cortex®-M7 @800Mhz

Up to 16GB LPDDR5 6.4GT/s (32-bit)

GPU Arm Mali-G310 V2 with 2D/3D acceleration

2x LVDS single channel / 1xLVDS dual channel
Optional HDMI® interface
1x 4-lanes CSI camera interface
Optional 1x 2-lanes CSI camera interface (alternative to HDMI® interface)

LVDS, HDMI®: up to 1080p @60Hz

Up to 128GB eMMC 5.1 drive soldered on-board (boot device)
SD 4-bit interface (boot device)

Up to 2x Gigabit Ethernet interfaces
Optional Wi-Fi (802.11a/b/g/n/ac/ax) + BT/BLE 5.3 module soldered on-board
SERDES (XGMII) interface for additional third Ethernet interface, up to 10Gbps supported

Up to 5x USB 2.0 host ports
1x USB SuperSpeed 5Gbps port
Up to 1x USB 2.0 OTG port

Up to 2x PCI-e x1 Gen3 ports

1x I2S audio interface

2x UART (4-wires)
2x UART (2-wires)

2x general purpose PWM
FAN Management Signals
Up to 12x GPIOs
1x general purpose I2C bus
1x power management I2C bus
1x general purpose SPI interface
1x QuadSPI interface or additional general purpose SPI interface
Watchdog
Boot select signals
Power management signals
JTAG Header
Optional TPM 2.0 soldered on-board

+5VDC ± 5% and +3.3V_RTC

Linux
Yocto

0 ÷ +60°C (Commercial Range)
-40 ÷ +85°C (Industrial Range)

Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.