SOLON

Rockchip RK3399 processor, 2x Cortex®-A72 MP cores + 4x Cortex®-A53 MPCores, up to 1.8GHz, 64-bit architecture 

Soldered-down LPDDR4 memory, up to 4GB total, 64-bit interface

4-Core Mali-T860MP4 GPU
OpenGL ES 1.1/2.0/3.0/3.1, OpenVG 1.1, OpenCL, DX11 support Embedded VPU, able to offer:

H.265 10-bit, H.264 10-bit, VP9 8-bit 4Kx2K@60fps HW Decoding

MPEG-4/MPEG-2/VP8 1080p@60fps HW Decoding

H.264, VP8 1080p@30fps HW encoding

Supports 2 independent video outputs

LVDS Single / Dual Channel interface
eDP 1.3 interface
HDMI 4K interface
DP 1.2 interface on USB Type-C connector (alternate mode)

HDMI, DP: Up to 4K x 2K @60Hz
eDP: Up to 4096 x 2160 (4K)
LVDS: Up to 1920 x 1080 @60Hz

SPI Flash (alternative to CAN Controller #1)
eMMC 5.1 Drive soldered on-board
microSD slot
 

Up to 2 x Gigabit Ethernet ports
Optional soldered on-board M.2 1216 WLAN 802.11 a/b/g/n/ac + BT 5.0 module
Optional on-board LTE Modem

1 x USB 3.0 Type-C port (Alternate mode with DP)
1x USB 3.0 Host port on Type-A socket
2 x USB 2.0 Host ports on Dual Type-A socket
Up to 2 x USB 2.0 Host ports on internal pin header

Optional I2S Audio Codec w/ TRSS Jack (MicIn / Lineout)

1x Debug UARTs
Up to 2x RS-232 (factory options)
Up to 2x RS-485 (factory options)
Up to 2x CAN ports (factory options)

Optional 2x MIPI-CSI Camera connectors, 4-lanes CSI input each one
miniSIM slot or eSIM for on-board optional modem
I/O Connector #1 with I2C interface + 1x Open-Drain + (RS-232 or RS-485 - factory alternatives)
I/O Connector #2 with 3xGPIOs + 1x PWM + (RS-232 or RS-485 or TTL UART - factory alternatives)
Dedicated connector for I2C Touch Screen Controller Support
Optional Ultra-low Power RTC (Alternative to CAN Controller #2)
Optional SPI external interface (alternative to CAN Controller #1)
Optional LED Driver
Optional Trust Secure Element on-board

+12VDC÷ +24VDC

Linux Yocto
Android (under development)

0°C ÷ +60°C (Commercial Temperature range)
-20°C ÷ +85°C (Extended Temperature range)

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.