Home / 停产产品 / SBC-C23

SBC-C23

Name: SBC-C23
SKU: SBC-C23

Smart Edge Compute Unit with NXP i.MX 6SoloX Processor

Product status

Development

Sampling

Production

Data Sheet

联系我们

CPU

NXP i.MX6SX SoloX

Graphics

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator

Connectivity

2x Fast Eth; WiFi; BLE; 3x Multicolor Signalling LEDs; 1x RS-232 port; 1x RS-485 port; 2x CAN port

Memory

32-bit DDR3L memory soldered onboard

Product details

Technical Info

Description

SBC-C23is a Smart Edge Compute Unit, built on NXP i. MX 6SoloX Processor, enables multi core edge computing and networking, while ensuring wide connectivity. As far as memory is concerned, the device features a 32-bit DDR3L memory soldered on-board, up to 1 GB. When it comes to interfaces the board is plentiful: networking interfaces - such as 2x Fast Ethernet RJ-45 ports, Wifi, BT LE combo module with on-board antenna - but also other interfaces like 2x CAN port, 4x analog inputs, I2C, 2x PWM and many others. The device is indeed a multiprotocol bridging for industrial PLCs and smart factory devices. Fields of application include Home Automation, Industrial Internet of Things and Surveillance among the many.
Processor

NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
Memory

32-bit DDR3L memory soldered onboard, up to 1GB
Graphics

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
Video Interfaces

Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals)
Max resolution 1366x768 @60 Hz, 24bpp
Mass Storage

8GB eMMC drive on-board
μSD Card slot
1MB SPI Flash
Networking

Up to 2x FastEthernet RJ-45 ports
Optional Single Band or Dual Band WiFi (802.11 b/g/n) + BT LE combo module with on-board PCB antennas or u/FL connectors, factory alternatives
Optional LTE-Cat4 Modem with integrated GNSS, with up to 3 external antennas
USB

1 x USB 2.0 Type-A socket
1 x USB 2.0 OTG on micro-AB connector
Audio

On-board buzzer
Serial Ports

All available on expansion connector:
- 1 x RS-232 port
- 1x RS-485 port
- 2 x CAN port
Other Interfaces

M.2 Socket 1 Key E 2230 (USB + PCI-e x1 interfaces) Slot
M.2 Socket 2 Key B 2242 (USB interface) Slot
microSIM slot or electronic SIM soldered on-board for the optional Modem and/or the M.2 Key B Slot
3x Multicolor signalling LEDs
Reset Button
Expansion PCB terminal block with:
-4x analog inputs
-I2C
2x PWM
Power Supply

+12VDC
DC power jack and 2-poles PCB terminal block for voltage supply
Optional Li-Ion Rechargeable battery
Operating System

Wind River Linux
Operating Temperature

0°C ÷ +60°C (Commercial version)
-40°C ÷ +85°C (Industrial version)

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions

153 x 89,5 mm (6” x 3,5”)