Q7 STARTER KIT 2.0

LVDS Dual Channel 24-bit + backlight connectors or 2 x eDP connectors
Multimode Display Port or HDMI Connector

1 x S-ATA connector with HDD Power connector
1 x mSATA Slot
microSD Slot on combo microSD + SIM connector

Up to 2 x Gigabit Ethernet connectors

1 x USB 3.0 Host port on type-A socket
2 x USB 2.0 Host ports on double Type-A sockets
2 x USB 2.0 Host ports on internal pin header
1 x USB 2.0 OTG port on micro-AB socket (USB port shared with miniPCI-e slot)

miniPCI-e slot Full / Half size, combined with SIM card slot

Audio interface on internal pin header

4-wires RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector
2 x RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven® module)
CAN interface on PCB terminal block

SPI internal pin header
LPC Bus internal pin header
SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header
Front Panel Header
1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management)
+12V Tachometric FAN connector
Optional Debug USB port on miniB socket
Optional MFG connector for JTAG programming of Qseven® module

+12VDC Mini-fit Standard ATX power connector

Coin cell battery Holder for CMOS and RTC

-40°C ÷ +85 °C (industrial range)

*All carrier board components must remain within the operating temperature at any and all times, including startup; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.