JUNO

Rockchip PX30 processor, 4x Cortex®-A35 cores

Soldered-down DDR3L memory, up to 4GB total, 32-bit interface

Mali-G31 GPU with High performance dedicated 2D processor
OpenGL ES 1.1 / 2.0 / 3.2, Vulkan 1.0, OpenCL 2.0 , DX11 FL9_3
Embedded VPU, able to offer:

• Multi-format 1080P 60fps video decoders (H.265, H.264,VC-1, MPEG-4, VP8)
• H.264 1080p@30fps HW encoding

Supports 2 independent video outputs

LVDS Single / Dual Channel interface
HDMI interface

HDMI Up to 1920x1080
LVDS Up to 1280x800

eMMC 5.1 Drive soldered on-board, up to 64GB

Optional microSD Slot

1x 10/100 Ethernet port

Optional M.2 Socket 1 Key E Slot for WiFi/BT LE external modules

Optional miniPCI-e slot (USB interface only) for external modem modules

3x USB 2.0 Host ports on standard Type-A slots

USB Recovery internal connector

2x USB 2.0 ports on internal pin headers

PMIC embedded Audio Codec
Stereo audio out on internal header
TRRS combo jack for Headphone and Mic In Line Out audio jack or I2S Audio Class-D amplifier with stereo out available on internal connector (factory alternatives)
Buzzer on-board

1x TTL or RS-232 port (factory alternative)
1x Debug UART
1x TTL or RS-232 port (factory alternatives to microSD slot)
1x RS-485 port on internal connector
1x CAN port

miniSIM Slot for optional miniPCI-e modem modules
Optional CSI Camera connector
Ultra-low Power RTC
Trusted Secure Element
4-Channel LED Driver connector

Microcontroller Programmable Interfaces:

2x 4-Wire UARTs on internal connector

2x 2-Wire UARTs on internal connector

1x SPI connector

2x I2C on internal connector

8-channel timer connector

16x GPIs @3.3V (5V tolerant)

16x GPOs @3.3V

+12VDC ÷ +24 VDC
RTC battery

Linux Yocto
Android

0°C ÷ +60°C (Commercial Temperature range)

-20°C÷ +85°C (Extended Temperature range)

-* Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature w0ill widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.