CQ7-D03

LVDS Dual Channel 24-bit + backlight connector
HDMI Connector

microSD Slot

1 x Gigabit Ethernet connectors
1 x Mini-PCIe Slot for WWAN Modem Modules, connected to
on-board microSIM slot

1 x USB 2.0 Host port on Type-A socket
1 x USB 3.0 Host ports on Type-A socket shared with USB
2.0 OTG Client
1 x USB 2.0 OTG port on micro-AB socket shared with USB
3.0 Host
1 x USB 2.0 Host port on internal connector
1 x USB 2.0 Host port on M.2 Socket 1 KeyE Slot
1 x USB 2.0 Host port on mini-PCIe Slot

1 x PCIe x1 lane on M.2 Socket 1 Key E Slot
1 x PCIe x1 lane on Mini-PCIe Slot

Optional combo TRSS audio connector Mic in/Stereo out

Optional 4-wires RS-232 / RS-422 / RS-485 configurable
serial port on pin header

Optional 1 x CAN port on pin header
1 x PCIe x1 lane on M.2 Socket 1 Key E Slot
1 x PCIe x1 lane on Mini-PCIe Slot
1 x 40 pin connector for I2C, SPI and General Purpose I/O,
pinout compatible with the Raspberry Pi - GPIO Connector
1 x LED driver connector
4-wires FAN connector configurable
microSIM Slot for miniPCIe Modem
Debug USB port on micro-AB socket
MFG connector for JTAG programming of Qseven® module

12VDC through USB Type-C connector
Coin cell battery Holder for CMOS and RTC

0°C ÷ +70°C *

*All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.